Re: TR3 Radiators / Thermostat Housing Rad Cap

["Joe Boruch" <jaboruch@netzero.net>]

I had almost the opposite set up on my Spitfire.  The radiator was
very low.  I put a high pressure cap on the radiator and sealed the
pressure relief.  I used an in-line cap in the hose from the t-stat
hsg to the top of the radiator, with a lower pressure cap.  Maybe
being in the hose and after the t-stat restriction was enough to lower
the pressure.  I was thinking about a similar set-up when I find a new
radiator.

Joe(B)