fot
[Top] [All Lists]

Re: Piston Clearance and Oil Journal ?'s

To: "Joe Guinan" <joeg@neb.rr.com>, <fot@autox.team.net>
Subject: Re: Piston Clearance and Oil Journal ?'s
From: "John Kipping" <johnkipping@inet.net.nz>
Date: Thu, 14 Apr 2005 11:19:14 +1200
I'm worried about the dome and compression ratio.
If the rules allow it have you considered sleeving a 1300 block to 1147 so
you can use eight port heads? It's much easier than trying to locate an
1147cc eight port.
John Kipping
----- Original Message ----- 
From: "Joe Guinan" <joeg@neb.rr.com>
To: <fot@autox.team.net>
Sent: Thursday, April 14, 2005 8:47 AM
Subject: Piston Clearance and Oil Journal ?'s


> The next couple of what I'm sure will be MANY questions...
>
> For a Spitfire 1147 racing engine;
>
> First - "Jahns" brand forged (and domed) pistons - what piston to cylinder
> wall clearance should I run?  The engine they came out of is bored for
.012
> inch of clearance.  Another "spare" block would give me about .006 inch of
> room. I know 12 has to be too much space, but is 6 also too much or is it
> about right?  I have spare stock blocks that I can use if necessary.
>
> Second - do you Spitfire guys drill out the oil journal that feeds #2 and
#3
> rod bearings?  To what size?
>
> Joe Guinan
> Fremont, NE
>
>
> -- 
> No virus found in this incoming message.
> Checked by AVG Anti-Virus.
> Version: 7.0.308 / Virus Database: 266.9.8 - Release Date: 13/04/05
>
>



-- 
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.308 / Virus Database: 266.9.8 - Release Date: 13/04/05

<Prev in Thread] Current Thread [Next in Thread>