Does the TR6 u-joints fit to a TR4 without changing the shaft ends?
Chris
----- Original Message -----
From: "Brad Eells" <bradlnss@lightspeed.net>
To: "Hugh Barber" <tr6nut@sbcglobal.net>; <N197TR4@cs.com>;
<awashatko@wi.rr.com>; <fot@autox.team.net>
Sent: Friday, March 25, 2005 6:31 AM
Subject: RE: Steering shaft
> The TR4 and 4A came from the factory with the rubber flex couplings on
both
> ends of the steering column. Some attempt at a collapsible system, I
> suppose. The couplings had a grounding cable that attached through the
> coupling to ground the horn.
>
> Cheers,
>
> Brad
> 62 TR4 Racer
> 65 TR4A IRS
>
> My TR6 has a rubber flex coupling on the
> top and a u-joint thingie on the bottom. I heard that it was the TR4 that
> had u-joints at both ends stock !!
>
> Hugh Barber
> Hollister, CA
> '73 TR6
|