You READ the instructions? What kind of guy are you.
Mordy Dunst has a special spray on sealer for his gaskets--probably the same
stuff you're talking about. Mordy's web site concludes that annealing
probably doesn't do much. All the same, I anneal mine
-----Original Message-----
From: owner-fot@autox.team.net [mailto:owner-fot@autox.team.net] On Behalf
Of Jeff Quick
Sent: Tuesday, March 15, 2005 10:18 PM
To: FOT; Chuck Arnold
Cc: Jeff Quick
Subject: Re: 2 issues: yamabond and ovdersteer
LOOK at the warnings on the yama-3bond NOT for copper! it eats it. I have
been looking for a gasket sealer I used years ago especiealy for steel shhim
gaskets. I used it working with ford and chrisler it comes in a arisol can
called perfect seal same product both manufatuers. Ive reused shim head
gskts with this stuff. but i cant find it now. Jeff
----- Original Message -----
From: "Chuck Arnold" <chuck.arnold@oracle.com>
To: "FOT" <fot@autox.team.net>
Sent: Tuesday, March 15, 2005 5:51 PM
Subject: 2 issues: yamabond and ovdersteer
> 1. I have to reset my copper head gasket this week. I am planning to
> use Yamabond as a sealer [copper gasket on tr6, very flat head and block].
> Today I got a tube of the #4. Last week Bill Babcock mentioned #5 as
> the desired for head gaskets. My question is, can the semi hardening
> #4 work with head gasket?
>
> 2. I have an Adco front sway bar on my TR6 and a custom, adjustable
> bar on the back. The car is quite loose [oversteers]. To 'tighten
> it", do I make the arms of the rear bar longer or shorter?
>
> Chuck
|