Joe: Yes, the taper and diameter are the same between a TR3 and a Spitfire.
This I know because I just did a rack and pinion conversion on a TR3 a couple
of months ago, and used the Spitfire rack and tie rod ends. The problem is if
you plan on putting these onto the TR3 steering links. You'll have to make
adapters to screw them into the existing threads. Thanks - Ed
jaboruch <jaboruch@adelphia.net> wrote:Amici, do you know if a Spitfire outer
tie rod end will fit into the
taper in the steering arm of a TR3? If not that, anyone have the
dimensions (diameter) of the taper of a Spitfire's outer tie rod end?
The TR4-6 outer tie rod ends are too big for the tapered hole in a
TR3's steering arm. Joe(B)
|