A steel TR4 flywheel should weight 7,9 pounds.
----- Original Message -----
From: "Ted Schumacher" <tedtsimx@bright.net>
To: <walt@hot-tr6.com>
Cc: <fot@Autox.Team.Net>
Sent: Friday, January 28, 2005 10:33 PM
Subject: Re: Commercial message - aluminum flywheels
> Let's see. That means a lightened steel flywheel, 6 pounds heavier than
> the aluminum unit (which comes with a new ring gear) will cost $270 vs
> $300. Hmm. Ted
>
> walt@hot-tr6.com wrote:
>
> >I have a few Stock late model TR6 flywheels that I have lightened from a
> >stock weight of 28 lbs down to 18lbs. These flywheels are then resurfaced
> >and balanced. The starter ring gear is replaced only if needed. These
work
> >quite nicely for a hot street motor and I have also used them for road
> >racing. Not as nice as the aluminum but readily available and affordable
at
> >$240 (plus $30 for shipping). The one on my TR6 has 30,000 street miles
and
> >a season and a half of autocrossing (SCCA regional champion in 2004+5 in
F
> >Prepared Class) as well as club road racing. No reliability problems.
See
> >ebaymotors item 4527688236.
> >I also have some lightened MGB flywheels. See ebay item 7950216798
> >Thank You
> >Walt Hollowell
> >Abq., NM
> >-----Original Message-----
> >From: owner-fot@Autox.Team.Net [mailto:owner-fot@Autox.Team.Net]On
> >Behalf Of Ted Schumacher
> >Sent: Friday, January 28, 2005 8:07 AM
> >To: 6pack@sutox.team.net; fot@Autox.Team.Net
> >Subject: Commercial message - aluminum flywheels
> >
> >
> >Hello list. The flywheel manufacturer who makes most of the aluminum
> >flywheels for our cars has no TR6 in stock. These are the units we
> >sell, along with VicBrit, Moss, etc. We supplied the mfg with the
> >original data for all the Brit flywheels so we get a "friendly" price.
> > We have several sold but not enough to make the number needed for
> >another production run. Help. If you are thinking of buying an
> >aluminum flywheel, this is the time. Price is $310 and we will pay the
> >shipping within the continental United States. This is for the late '71
> >to '76 TR6. Once we have reached the number needed for a production
> >run, this offer will cease. Details on this, and other products are on
> >our website. Thank you for your time. Ted
> >
> >--
> >Ted Schumacher
> >tedtsimx@bright.net
> >http://www.tsimportedautomotive.com
> >108 S. Jefferson St.
> >Pandora, Ohio, USA 45877
> >Fax: 419.384.3272 (24 Hrs.)
> >Phone: 800.543.6648 (US & Canada)
> >Tech/ Gen. Information/ Worldwide: 419.384.3022
> >
> >
> >
>
> --
> Ted Schumacher
> tedtsimx@bright.net
> http://www.tsimportedautomotive.com
> 108 S. Jefferson St.
> Pandora, Ohio, USA 45877
> Fax: 419.384.3272 (24 Hrs.)
> Phone: 800.543.6648 (US & Canada)
> Tech/ Gen. Information/ Worldwide: 419.384.3022
|