Hi Jerry, I don't remember what TRF supplied me with when I did the half
shafts on the 250, but I do remember having trouble with the cir-clips on
the u joints. I ended up using the old clips as the new ones wouldn't go in
both sides.
Ed
----- Original Message -----
From: "Gerald M Van Vlack" <jerryvv@alltel.net>
To: "Triumphs" <triumphs@Autox.Team.Net>
Cc: "FOT" <fot@Autox.Team.Net>
Sent: Sunday, January 02, 2005 11:15 AM
Subject: U-Joints
> Lists,
>
> I read on a listers TR-6 web site that the GMB U-joints P/N 220-1100 are a
> tad
> long making the retainer cir-clips difficult to insert. Does anyone else
> have
> first hand experience with the GMB joints. Turns out that I have 4 of the
> GMB
> Joints that I was going to use in the rebuild of my half shafts and I
> don't
> need problems. On the other hand if others have used them with no
> difficulty
> I'd like to know that as well.
>
> So the question is this: Has anyone else had difficulty using the GMB
> U-joints?
>
> Thanks,
> Jerry Van Vlack
|