You can apply the KISS principle. If you run a remote oil filter or screen,
tap into one of the oil lines. Saves you the effort of tapping the block.
The accusump comes with plumbing scheme instructions outling which line to
use and where to install the one way valve. 8 is more than adequate 10 is
even better.
Bob
----- Original Message -----
From: "Joe Boruch" <jaboruch@netzero.net>
To: <vinttr4@geneseo.net>
Cc: <FOT@autox.team.net>
Sent: Wednesday, June 23, 2004 10:29 PM
Subject: Re: Accusump plumbing
> 8AN. Joe(B)
>
> -- "Jack W. Drews" <vinttr4@geneseo.net> wrote:
> I plan to plumb the new Accusump directly into the oil gallery, since I
> have the engine out and can drill and tap properly.
>
> The Accusump comes with 1/2 NPT ports. Tapping the block for this size
> seems pretty big but I do want good flow.
>
> Fittings seem to come with 3/8 NPT to 6 or 8AN, and 1/2NPT to 8 or 10AN.
>
> My tendency is to use 3/8NPT to 8AN.
>
> Question for you guys who are plumbed this way -- which size do you use?
>
> uncle jack
>
>
> ________________________________________________________________
> The best thing to hit the Internet in years - NetZero HiSpeed!
> Surf the Web up to FIVE TIMES FASTER!
|