Dean/Joe,
Is the TR4 column different from a TR6? I ask because on my "6", the top of
the column (where the rubber mount goes) has metal "arms" that are cast into
the part and have threaded holes for the bolts that go through the rubber
mount. The bottom has the "normal" spline for the U-joint.
Hugh Barber
Hollister, CA
'73 TR6
-----Original Message-----
From: owner-fot@autox.team.net [mailto:owner-fot@autox.team.net] On Behalf
Of Dean Tetterton
Sent: Tuesday, March 09, 2004 12:03 PM
To: jaboruch; Friends of Triumph
Subject: Re: TR4-6 steering column
Joe (B);
I used the U-joint from the bottom of a TR6 for both joints on
my TR4. Dean T.
----- Original Message -----
From: "jaboruch" <jaboruch@adelphia.net>
To: "Friends of Triumph" <FOT@autox.team.net>
Sent: Tuesday, March 09, 2004 2:25 PM
Subject: TR4-6 steering column
> Does anyone know of a U-joint that is available to replace the
> flexible rubber coupling at the top of a TR4-6 steering column? It
> does not look to me that the lower u-joint from a TR6 has the same
> spline as at the bottom of the upper steering column, but I have not
> measured any yet. Joe(B)
|