I put a huge radiator in my cheater TR3. The rules from the old GCRs only
require that the radiator use the original mounts. I went to a large
radiator shop that does fabrication and had them make one that fit the hole
with studs on the bottom to connect to rubber-mounted Z bracket using the
original mounting spots. Piece of cake. I suspect you could find a
pre-fabbed radiator of about the right size but it was cheap and easy to get
one made.
-----Original Message-----
From: owner-fot@autox.team.net [mailto:owner-fot@autox.team.net] On Behalf
Of Jeff Snook
Sent: Friday, January 23, 2004 5:23 AM
To: Jack W. Drews; fot@autox.team.net
Subject: Re: TR3 aluminum radiator?
Nope, we only run "stock" components in our TR3.
Vroom, vroom,
Jeff Snook
http://www.snooksdreamcars.com
----- Original Message -----
From: "Jack W. Drews" <vinttr4@geneseo.net>
To: <fot@autox.team.net>
Sent: Thursday, January 22, 2004 6:32 PM
Subject: TR3 aluminum radiator?
> I have a friend who desires to put a larger radiator in his TR3. We do
this
> all the time to TR4's, but I don't know if one will fit a TR3.
>
> Does anyone on the list have a TR3 with one of the 19" x 22" stock car
type
> radiators in it?
>
> Does anyone have a "Griffith" radiator?
>
> Thanks.
>
> uncle jack
|