fot
[Top] [All Lists]

Re: dyno test of TR-4

To: jaboruch@adelphia.net, fot@autox.team.net
Subject: Re: dyno test of TR-4
From: N197TR4@cs.com
Date: Tue, 14 Oct 2003 07:48:14 EDT
Kas recounts some dyno work on a TR250 engine and making bigger HP by just 
changing velocity stacks.

I am getting more anxious to check the efficiency of the ones my son Sean 
made out aluminum billet. Unlikely, but I think it would be a hoot if they 
turned 
out to be heads above the alternatives. 

> I had a similar experience a few years ago with HS6 carbs.  I could
> not get any power over 6000 rpm on the track.  I just could not get
> them to flow enough fuel.  I put air cleaners on to add some
> restriction and gained 300 rpm on the straights.  I did not, however,
> go so far as to add the weber style spacers.  Joe(B)

<Prev in Thread] Current Thread [Next in Thread>