Thanks John It is the drive gear I am asking about . Can these gears be
messured to determine wear or is it just done buy an exper. engine
builder that looks them over and decides if they are good or bad Are
drawings availabe to check how much wear there is. Are there specific
tools used to check the pitch of the gear? thanks rob
----- Original Message -----
From: "John Kipping" <johnkipping@inet.net.nz>
To: "Robert Dardano" <19to1tr6@attbi.com>; "team" <fot@autox.team.net>
Sent: Sunday, May 11, 2003 1:04 AM
Subject: Re: Distributor end float
> I can't see any reason for distributor end float to be critical, however
it
> is very important for the distributor drive gear to have end float
otherwise
> it can strip teeth of the gear or cam.
> John Kipping
> ----- Original Message -----
> From: "Robert Dardano" <19to1tr6@attbi.com>
> To: "team" <fot@autox.team.net>
> Sent: Sunday, May 11, 2003 3:29 PM
> Subject: Distributor end float
>
>
> > Hi guys and Gals can anyone explain why distributor end float is
critcal.
> and
> > what may happen when its not adjusted correctly thanks rob
|