>From my experience they are all the same size at the weld plug! The main
difference is whether it is a 2-wire or 3-wire(warms up quicker). The one I
used from autometer worked great, but you have to run unleaded gas. Hard to
find 100 no lead octane here in CA. Also look into temp exhaust gas meter's.
You can hook them into the seperate header pipes near the port and get
readings. Hope this helps!
John Wilkins #892
"66 Triumph Spitfire"
----- Original Message -----
From: <Robertten1@aol.com>
To: <fot@autox.team.net>
Sent: Wednesday, March 20, 2002 5:30 PM
Subject: Air-Fuel Sensor Info
> Amici-
>
> Looking for some info about O/2 sensors ... are they all standard on the
> thread size or do they come in different thread sizes? Any help would be
> greatly appreciated.
>
> Thanks,
> Bob T.
> '63 Spitfire Mk1 rhd
> '64 Spitfire GT LeMans replica/autocrosser
|