You certainly want to make sure that the nuts don't bottom against the hub /
drum
before they pull the wheel up tight.
- Tony Drews
WEmery7451@aol.com wrote:
> In a message dated 12/12/01 5:47:42 AM Pacific Standard Time,
> Brad.Kahler@141.com writes:
>
> << My question is, if the hole in the wheel is larger than the wheel
> stud is this a problem when using the tapered type lug nuts? In
> other words, does it matter if the sides of the studs don't make
> contact with wheel itself? >>
>
> I could be wrong, but it appears that all lug nut tapers fit all rims
> designed to used tapered nuts, so long as the rim holes are larger than the
> studs used. I have 7/16" studs on the back and 1/2" studs on the front. Any
> of my rims work of both the front or the back.
|