I used to figure I needed at least 20 gals per hour.
----- Original Message -----
From: "Rob Dardano" <19to1tr6@mediaone.net>
To: "Joe Curry" <spitlist@gte.net>; "Robert M. Lang" <lang@isis.mit.edu>;
"TeriAnn Wakeman" <twakeman@cruzers.com>; "andrew stark"
<whitedog72@hotmail.com>; "FOT" <fot@autox.team.net>
Sent: Tuesday, October 30, 2001 4:32 PM
Subject: Re: Weber Jets
> What kind of volume are we talking about X? ounces per. minute? does any
one
> have a volume amount ?? thanks rob
> ----- Original Message -----
> From: "Joe Curry" <spitlist@gte.net>
> To: "Robert M. Lang" <lang@isis.mit.edu>; "TeriAnn Wakeman"
> <twakeman@cruzers.com>; "andrew stark" <whitedog72@hotmail.com>; "FOT"
> <fot@autox.team.net>
> Sent: Tuesday, October 30, 2001 1:37 PM
> Subject: Re: Weber Jets
>
>
> > Let me correct my previous message.
> >
> > The regulator is not Low Volume but rather low pressure. It regulates
the
> fuel pressure to the under 4 psi that is required for the Webers and still
> > delivers the volume that is required.
> >
> > Joe (C)
> >
> > Joe Curry wrote:
> > >
> > > I have a Holly High volume pump (the blue one) a Holly low volume
> Regulator and an AutoMeter Fuel gauge that I have left over from the Tiny
> TIm
> > > conversion to the Honda S2000 engine. I will let all these items go
for
> a total of $150 plus shipping. All have been used for less than a year
and
> > > are in excellent condition.
> > >
> > > It is just what is required to supply those triple webers.
> > >
> > > Regards,
> > > Joe Curry
|