On Sun, 22 Oct 2000 GuyotLeonF@aol.com wrote:
> Does anyone have the exact weight of a standard unmodified TR6 flywheel
> please?
This is anecdotal, but I measured 5 TR6 flywheels for an important
"project" back in june (my car weighed in 23 pounds _under_ at a pre-race
tech inspection!), and I found that the weight actually varied between 28
and 32 pounds.
Now, I had a stack of 5 flywheels, and at least two were the "early style"
and the others were the "late style", I forget which ones are heavier.
One of the early ones weighed under 20 pounds, but that one was clearly
"cut" for weight reduction.
> TYIA
>
> Léon F Guyot
Hope this helps.
rml
-------------------------------------------------------------------------------
Bob Lang Room N42-140Q | This space for rent.
Consultant MIT Computer Services |
Voice: (617)253-7438 FAX: (617)258-9535 |
-------------------------------------------------------------------------------
|