Help!
Recently a single rail transmission with OD was purchased for installation in
Susan's mk3 spitfire. Currently the car has a single rail gearbox installed so
we were hoping for a direct swap. However the gearbox with the OD attached
turns out to have come from a Dolomite 1850. The input shaft has 23 splines,
is .989" in diameter across the splines and the distance from the tip of the
mainshaft to the outer face of the bearing race is 7".
What we need to know is what are the dimensions for a spitfrie 1500 single rail
gearbox? Obviously we're hoping that this gearbox will work as is with the
Dolomite mainshaft in her spitfire but I believe the odds are going to be
against that!!
Any help would be greatly appreciated!
TIA
--
Brad
http://www.141.com/Triumphs
http://www.141.com/Dodge
1959 TR3 Vintage Racer (with small mouth!)
1951 Dodge 1/2 ton B3B pickup (being restored)
1953 Mayflower TT29490LDL (almost a driver, ha!)
1961 TR4 CT288L (being restored)
1962 TR3B TCF1564L (some day)
1964 Spitfire 4 BFC25720L (of Belgian decent)
|