fot
[Top] [All Lists]

RE: Rev Limiter

To: "James F. Libecco" <jfl@neoucom.edu>
Subject: RE: Rev Limiter
From: Bob Lang <LANG@isis.mit.edu>
Date: Wed, 16 Aug 2000 14:05:21 -0400 (EDT)
Hi,

According to the MSD wab pages (www.msdignition.com), the RPM series kits
come in 200 RPM increments. So, if you want 6500, you buy the "6100"  kit
(part number 87461. That gets you "chips" for 6100, 6300, 6500 etc., there
are 5 chips in the kit. If you want 6200 as your limit, you buy the 6000
(p.n. 8746) kit which gets you 6000, 6200, 6400, etc. 

I have no direct experience in the matter, but I have seen folks swap the 
limiting chips and they seem to work as advertized.

It's just more money to spend to get to rev-limiting nirvanah, as near as 
I can tell.

rml
-------------------------------------------------------------------------------
Bob Lang                Room N42-140Q          | This space for rent.
Consultant              MIT Computer Services  |        
Voice: (617)253-7438    FAX: (617)258-9535     |
-------------------------------------------------------------------------------


<Prev in Thread] Current Thread [Next in Thread>