Henry,
The Roadster Factory is still selling the copper figure-8 gaskets. I
checked with them in January, and they pulled some individual ones off the
shelf, and they were copper. If you buy them as part of a top end gasket
set they are steel. If you can't find them, I have a couple spares.
Joe
----- Original Message -----
From: Henry Frye <thefryes@iconn.net>
To: <fot@autox.team.net>
Sent: Monday, March 06, 2000 7:28 AM
Subject: Early High Port Heads & Figure 8's
> Greetings,
>
> On a related note, does anyone have any of the copper figure 8 gaskets
they
> would be willing to sell? My liners are coming up a solid .002 with the
> thinner steel gaskets. The copper ones are .018, and would do the trick
nicely.
>
> Thanks again. Savannah is going to happen!
> Henry Frye thefryes@iconn.net
> http://members.iconn.net/~thefryes/amici.html
> For The Street - TR3B TR250 Stag
> Not For The Street - TR4
>
|