--part1_9e.1d9dfa0.25f16a10_boundary
--part1_9e.1d9dfa0.25f16a10_boundary
Content-Disposition: inline
Return-path: WEmery7451@aol.com
From: WEmery7451@aol.com
Full-name: WEmery7451
Message-ID: <18.158ae24.25f168ce@aol.com>
Date: Fri, 3 Mar 2000 14:13:18 EST
Subject: 15 X 7 Wheels
To: ggrant@beta.tricity.wsu.edu
MIME-Version: 1.0
X-Mailer: AOL 4.0 for Windows 95 sub 10
Glenn,
I am using the Panasport 15" x 7" rims on my TR-3 race car. I discovered the
hard way that the offset was somewhere between 1/2" to 1" greater than my
widened out Triumph rims. I therefore lost some track that I had with my
widen out steel Triumph rims.
I think the offset is 3 inches for the Triumph rims. Lay down the rim and
measure it to be sure. You also may run into clearance problems with the
upper ball joint. I installed 3" Morosso studs in the hubs and stack a 1/2"
and 1/4 aluminum plates on each side, which eliminates clearance problems.
Bill Emery
--part1_9e.1d9dfa0.25f16a10_boundary--
|