going on memory here.....
Assuming you got the obvious hardware...
Don't forget the inner bulkhead (in the wheelwell area) bolts... easy to
miss cuz they get covered with crud... I think 3 bolts.... AND....
In my experience... there's sometimes a little tack welding near the
front... Don't try to beat a tack weld by brute force or twisting of
the panel... locate it, and cut it with a metal cuter... i.e. a cut-off
disc on a hand grinder, etc...
--Justin
Steve Benford Jr. wrote:
> Amici :
> How do I go about removing the front fenders from my TR4? I think I
> have removed all of the hardware, but the fender seems to have rusted
> itself to the inner fenders. I suppose there is some sort of sealer
> that needs to be romoved at the firewall bulkhead. Any hints and help
> would be greatly appreciated.
> Steve
|