Leon,
I use solid copper core wires in my vintage vehicles (TR3A and Norton), but
I don't have a radios in them. I don't get any ignition noise on my
Cellular phone or the CB I use when travelling distance with friends. No
fancy cross wound, layered carbon, filament wires, just solid copper wire
thick black insulation.
I haven't noticed it with my TR3A, but when I pull up next to cars on my
Norton, I would occasionally see people fiddling with their radios. ;-)
Solid copper ignition wires rule!
Jack Brooks
1960 TR3A
1974 Norton 850 Commando
Hillsdale, NJ
> -----Original Message-----
> From: owner-fot@autox.team.net [mailto:owner-fot@autox.team.net]On
> Behalf Of GuyotLeonF@aol.com
> Sent: Tuesday, January 18, 2000 2:28 PM
> To: FOT
> Cc: triumphs@autox.team.net
> Subject: Survey of H.T.Leads in use by listers
>
>
> Friends, Romans & Listers,
>
> In my contining quest to find and fit all the best parts to my
> Triumph, and
> to help you all do the same...
>
> I am now reviewing the question of "What are the best High Tension Leads?"
>
> Tell us/me what you presently have fitted to your cars, What make
> are they?
> What type are they? Are you happy with them? How often do you
> replace them?
>
> Those presently fitted to my Triumph Vitesse were sold to me by
> Microdynamics/ M.D. Motorsports, (now defunct/bought out by Luminition),
> about 1986.
>
> Described as "8mm Super Heavy Duty Hypalite Wirewound construction"
> it says here that they are made from 8mm heavy duty hypalon-jacketed
> competition cable. Fitted with high-temperature silicon and
> hypalon, fully
> waterproofed wnd covers over spring steel reinforced pure brass
> terminations.
> The 8mm cable is constructed by a unique method, incorporating a woven
> glassfibre-reinforced layer between the high-voltage silicon rubber
> dielectric and the outer hypalon sheath. This enables the end
> terminations to
> grip through to this woven layer and be securely held against any
> end tension
> forces which may be encountered.
>
> A super-low resistance cupro-nickle conductor is spirally wound around a
> unique ferro-magnetic core, strengthened by an innner synthetic
> fibre cord.
> These features enable the Hypalite lead to offer unprecedented levels of
> transmission efficiency, interference supression, insulation properties,
> hydrocarbon and weather resistance, combined with sheer ruggedness...
>
> (they also did a 7mm cable for less demanding applications)
> (much of the above is rather stating the obvious, but that's
> blurb for you)
>
> They have been in use on my car since April 97, and have just
> covered 5,500
> miles.
>
> I am wondering if they are still really OK?
> Might they have deteriorated whilst in storage and not being used?
> Should I now replace them? and if so what with?
>
> I assume that H.T. lead technology may have moved on a little in
> the last 14
> years?
>
> Those offered by Cambridge Motorsport sound interesting...
>
> Magnecor (UK) Leads:
> made from KV85 competition cable designed to work at
> high-temperatures and
> high r.p.m. 8.5mm aerospace quality silicon lead. Safe to 600 Fahrenheit,
> stainless steel helically wound core protects against radio
> interference and
> inducts electrical energy along the lead.
>
> (sounds rather familiar?)
>
> I await your recommendations etc with baited breath.
> enquiring (sad) minds etc.
>
> Best Regards
>
> Léon F Guyot
>
> Triumph Sports Six Club
> International Liaison Secretary
> 1963 Triumph Vitesse 2-Litre Convertible
> Wimbledon, London, England.
>
|