So what is the concensus on order of the brake bleed process after bleeding
the master cylinder? Larry.
----- Original Message -----
From: <vulforge@aol.com>
To: <datsun-roadsters@autox.team.net>
Sent: Thursday, May 10, 2012 12:08 PM
Subject: [Roadsters] Brakes
The brakes on these cars are more than adequate IF everything is up to
snuff.
Make sure the rubber hoses and pistons are good and
flush and bleed the system with the front of the car elevated at least 6
inches. There is a part of the system that will hold a little air if you
bleed with the car level. Once you get ALL the air out the brakes work
great!
Russell Criswell
Vulcan's Forge
3936 Broadway
Kansas City, MO
64111
816-931-6303
816-931-9378 fax
877-531-1046 toll-free
www.vulcans-forge.com
________________________________________
datsun-roadsters@autox.team.net
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe:
http://autox.team.net/mailman/options/datsun-roadsters/roadster68@shaw.ca
________________________________________
datsun-roadsters@autox.team.net
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe:
http://autox.team.net/mailman/options/datsun-roadsters/mharc@autox.team.net
|