datsun-roadsters
[Top] [All Lists]

Re: [Roadsters] Door sills

To: datsun-roadsters@autox.team.net
Subject: Re: [Roadsters] Door sills
From: ncoonen@fastbears.com
Date: Tue, 01 Mar 2011 14:13:01 -0500
Use a paste type aluminum/metal polish. Mother's and Meguiar's have such 
products (Google them). If you don't want to buy something special for just 
those pieces, I would try whatever kind of polishing compound you might have on 
hand. This won't work well if the pieces are badly corroded but otherwise, 
you'll get a shine. Careful use of fine steel wool will help with corrosion. I 
would avoid sandpaper at all costs.

Good luck...ned.
'69 Datsun 2000 (still on jack stands)

Quoting Dan Kroninger <d_kroninger@hotmail.com>:

> Hey all,
>
> I pulled a few aluminum parts to clean and polish this winter.  The valve
> cover and carb domes are done.  I also have the door sill out.  They were
> dirty, which I cleaned with water and Comet.  So it is cleaner, but I want to
> polish it up.  Since it has the ridges, it is really hard to sand without
> distorting it.  Any one have suggestions?
>
> Dan Kroninger
> Dairyland Datsun68 1600
> ________________________________________
> Datsun-roadsters@autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation  $16.00
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage: 
> http://autox.team.net/mailman/options/datsun-roadsters/ncoonen@fastbears.com
________________________________________
Datsun-roadsters@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $16.00
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums

<Prev in Thread] Current Thread [Next in Thread>