So was I, which is why I said filter -HOUSING- instead of -COVER-.
Sorry for any confusion.
Pete
----- Original Message -----
From: Keith0alan@aol.com
To: aultgc@att.net, ppeters914@comcast.net, datsun-roadsters@autox.team.net
Sent: Tuesday, July 21, 2009 5:18:46 AM GMT -08:00 US/Canada Pacific
Subject: Re: [Roadsters] SU air filter housing bolt size
I was referring to the bolts that hold the base to the carbs.
keith williams
In a message dated 7/20/2009 6:54:12 P.M. Pacific Daylight Time, aultgc@att.net
writes:
I presumed that Pete was referring to 2000 SU air cleaners, aince the 1600
air cleaners have wing nuts on captive bolts. The Nissan parts manual only
lists one wing bolt for the 2000 SU air cleaner, and it is metric.
Can't comment on the 1600 air cleaner.
Gary
----- Original Message -----
From: <Keith0alan@aol.com>
To: <ppeters914@comcast.net>; <datsun-roadsters@autox.team.net>
Sent: Monday, July 20, 2009 8:43 AM
Subject: Re: [Roadsters] SU air filter housing bolt size
> As I recall the early are 5/16 fine thread and about 68 they went to
> 8X1.25
> metric. I heli-coil a number where they have been cross threaded or the
> wrong bolt put in.
>
> keith williams
>
>
> In a message dated 7/19/2009 11:45:10 A.M. Pacific Daylight Time,
> ppeters914@comcast.net writes:
>
> Anyone have the bolt size handy for the SU air filter housing? Did these
> change from SAE to metric in the later models?
>
> Thanks.
>
> Pete
What's for dinner tonight? Find quick and easy dinner ideas for any occasion.
________________________________________
Support Team.Net http://www.team.net/donate.html
Datsun-roadsters mailing list
http://www.team.net/archive
http://autox.team.net/mailman/listinfo/datsun-roadsters
|