Re: [Roadsters] Blinker issue

[pat@hornesystemstx.com]

   It's  below  the  dash  against the driver's door. There is a triangle
   shaped  metal  support  from  the dash to the door post. The switch is
   mounted  there. If it is not there, check to see if there is a harness
   connector  behind  the  triangle  with  a  shorting plug in it. If the
   shorting plug is there then you don't have a hazard switch.
   Peace,
   Pat

     -------- Original Message --------
     Subject: Re: [Roadsters] Blinker issue
     From: Steve Jacobson <jake7140@yahoo.com>
     Date: Sun, September 28, 2008 4:46 pm
     To: datsun-roadsters@autox.team.net
     .... looking for the hazard switch on my 67.5......
     Steve
     Steve's Racing web site
     www.NoNameRacing.com
     Elkhart Lake Racing & Sipping Society
     www.elrss.com
     Date: Sun, 28 Sep 2008 09:15:58 -0500
     From: Pat <Pat@HorneSystemsTx.com>
     Subject: Re: [Roadsters] Blinker issue
     To: jake7140@yahoo.com
     Cc: datsun-roadsters@autox.team.net
     Message-ID: <48DF919E.2070507@HorneSystemsTx.com>
     Content-Type: text/plain; charset=ISO-8859-1; format=flowed
     Steve,
     My vote is for the emergency flasher switch. I'll bet it is pulled,
     which  should cause both sides to flash, but the switches are known
     to
     get  dirty, causing only one side to flash. Push the switch back in
     and
     your turn signals should work fine.
     Peace,
     Pat
     ________________________________________
     Support Team.Net http://www.team.net/donate.html
     You are subscribed as pat@hornesystemstx.com
     Datsun-roadsters mailing list
     http://www.team.net/archive
     http://aut ox.team.net/mailman/listinfo/datsun-roadsters
________________________________________
Support Team.Net  http://www.team.net/donate.html


Datsun-roadsters mailing list

http://www.team.net/archive

http://autox.team.net/mailman/listinfo/datsun-roadsters