You may have a stuck plunger in the master. Have someone step on the clutch
repeatedly while you gently but firmly tap on the sides and end of the
master. If it is indeed a stuck plunger it should free it up and then
operate normally.
HTH
E
> Got the Datsun running yesterday thinking that we most likely won't get
> anymore snow here in Wisconsin? When I tried to engage the clutch I had
> no pedal action at all.
> I drained all of the old fluid from the system and used an air hose to
> blow out the lines. I install the bleed screws, filled the system but
> wasn't able to get any fluid into the system for bleeding. I noticed
> that the actuator on the firewall doesn't have a bleed screw on it as
> opposed to the brake system which does have bleed screws. There is a
> plug installed on the bottom of the actuator however. What is this plug
> used for? Any hints on what I'm doing wrong are appreciated.
>
> Steve
________________________________________
Support Team.Net http://www.team.net/donate.html
Datsun-roadsters mailing list
http://www.team.net/archive
http://autox.team.net/mailman/listinfo/datsun-roadsters
|