"then one more question - i think its an oil pressure warning light sensor?
towards the back of the block, down near the oil filter and oil pressure
sensor, there is another hole in the block that spurted oil wonderfully onto
the garage floor."
That would be the oil feed for the tachometer gear drive, which is located
at the base of the distributor.
You will also need a small adapter for the block end and the tube to connect
the oil feed to the drive housing.
"and while i'm asking - what's the recommended pressure for the (not quite
on
the) radiator cap?"
0.9Bar or 13PSI should be OK
Version: 7.5.472 / Virus Database: 269.9.6/865 - Release Date: 24/06/2007
8:33 AM
|