Nothing in the mail list archives, but found the following info on the 311s.org
website...
Aftermarket (Beck/Arnley, Raybestos, Bendix, etc) rubber brake lines from 1966
-1972 L520 or L521 pickups work, so possibly the clutch slave hose will too.
Another person (Maggie in Texas) took their old hose into Car Quest. They
measured it, figured out the threads and found one a few inches longer that fit
great. The part number is SP7000; cost $14.97.
Hope this helps.
Pete
-------------- Original message --------------
From: Perry Smith <tpsmithstl@yahoo.com>
> Local is St. Louis, MO. Actually I tried to call two of the vendors (too
>late)
> on Friday to try and get the most, but - as I menteiond, it was too late to
>get
> them on the phone. Unless anyone has a good alternative, I'll just order one
> and put a new one on a bleed it again when it arrives.
>
> Thanks for everyon'es help!
>
> Perry Smith
> St. Louis
> '68 2000
>
>
> ----- Original Message ----
> From: roadster68
> To: Perry Smith ; datsun-roadsters@autox.team.net
> Sent: Friday, May 11, 2007 11:26:24 PM
> Subject: Re: Clutch Slave Hydraulic Hose
>
>
> So Perry, Where is local? Larry.
>
> ----- Original Message -----
> From: "Perry Smith"
> To:
> Sent: Friday, May 11, 2007 2:14 PM
> Subject: Clutch Slave Hydraulic Hose
>
>
> > Does anyone know if there is a standard hydraulic hose that can be used
> > for the slave cylinder on a '68 2000? I'm trying to get one locally so I
> > can get it fast...
> >
> > TIA,
> > Perry Smith
|