I have a '69 2000. I'm dealing with a voltage regulator issue (alternator is
full ON all the time so voltage is too high). I'm suspecting connectors or
wiring between the regulator and alternator but need better documentation to go
further. I have an older and new voltage regulator. Both do the same thing. I
also have schematics but the drawings I have for the regulator don't agree with
the actual circuits and omponents inside my regulator. Wires are connected
differently in the real thing compared to the drawing and the configuration is
different. There are 3 resistors in the drawing and only 2 in the actual
regulator. Does anyone out there have a drawing of the internal components and
wiring of the voltage regulator with two internal resistors so I can do some
troubleshooting?
Thanks
Dave C
Summit, NJ
|