Sent to me instead of list/Andy cost
-------- Original Message --------
Subject: Re: Bonding Motor Mounts
Date: Mon, 3 Jan 2005 15:13:02 -0600 (Central Standard Time)
From: Ron Mistak <remfender@earthlink.net>
To: <fj201@cox.net>
References: <41D986EB.2070400@cox.net>
Hi,, the other day i was using POR15 thick paint in the tube, and was
putting it
in the cowl area where it was rusted, i was using a sponge brush small
one
when i got done i laid it on a piece of wood, well the other day i
tried to pull it
off and no way , i finally had to use a hammer and screwdriver like a chisel
even tore up some of the wood and the soft sponge is hard as a rock,,
try the por15 putty , i have used it and it works for me , i use some in
the
sealer areas and also some rusted parts of my roadster, putting one piece of
steel plate about 6 inches onto another for more strength not welded.
its tough stuff,,, just type in por15 on the net to find the nearest dealer
Ron Mistak
Add FUN to your email - CLICK HERE!
<http://www.incredimail.com/index.asp?id=54475>
|