I bought one of them and dry fit it. Should work, but quite a bit shorter
that the original--if I remember correctly, things will drain out towards
the top of the tranny rather than down by the side of it.
Last I knew, Dean had some made to spec.
Tim
-----Original Message-----
From: owner-datsun-roadsters@Autox.Team.Net
[mailto:owner-datsun-roadsters@Autox.Team.Net]On Behalf Of Mark Sedlack
Sent: Monday, January 03, 2005 6:25 AM
To: SlowBoy; datsun-roadsters@Autox.Team.Net
Subject: Re: Cowl Drain Hose
Somebody on the list posted this a while back - apologies that I didn't save
who it was....couldn't find it in the archives.
" Seems like I have found a very inexpensive (7 bucks), readily
available,
Cowl Drain hose source. At least for early cars.
My friendly (or lazy) Auto Zone clerk let me in the back as I
approached him with rotten rubber and told him I had a "mission
impossible" for him. He took one look at my mess and said go back and
take a look.
Anyway goldmine! I have no idea what car it is for, but it is labled
224. Under the bar code there are these #s; o 37256 00220 5
The bends are almost PERFECT! the diameter is a wee bit smaller, which
makes for a tight fit and a bit of work to stretch over the fitting,
but it works!!! The length is enough to dump the water down past the
tranny."
Mark
----- Original Message -----
From: "SlowBoy" <slowboy@cox.net>
To: <datsun-roadsters@Autox.Team.Net>
Sent: Monday, January 03, 2005 12:18 AM
Subject: Cowl Drain Hose
> Has anyone come up with a replacement for the cowl drain hose?
>
> Thanks!
|