well I got my 67 1600 off the jack stands. I pulled apart one of the front
calipers that was leaking but I cannot see anything wrong with. they are
stainless lined and have new seals. I will see if it took this time. I
finished up the front suspension work with the help of the list and Keith. thx
to both. I put new ngk plugs an wires on it. I was surprised at the
improvement. it tries to stall at idle but I have not set the timing, adjusted
valves, adjusted carbs since the wire/plug change. rides better and feels
tighter. next stop will be the alignment guy. thx everyone.
mike
|