Gary,
The black with red tube goes to a black with red striped wire. The
solid black goes to a solid green wire. I got this off my '70 2000, which
is slightly older than yours I think? I worked on my clutch petal
tonight... thing was badly worn and holes elongated, so welded them up and
redrilled them, so while I was doing that, figured it couldn't hurt to check
those wires for ya!
Good luck on that dash work!
Eric
www.wycroc.org
> Hi roadster fans,
> I'm in the process of replacing the broken wiring connector plugs for my
> turn signal switch in my '70 2000. I've oriented 6 of the 8 wires in
> the new connector to match the wires' color codes between the switches
> wires and the harnesses wires. But there are 2 wires that don't have
> color matching mates from one side to the other and I don't know which
> wire connects to which. The odd wires on the switch side are 1) black
> and 2) black with a short red tube. The odd wires on the harness side
> are 1) green and 2) black with red stripe. Hopefully someone is doing a
> winter project under the dash like me and can see their connector and
> tell me the answer. Thanks for any help.
> Gary
> http://www.wycroc.org
|