Matt,
Yup, that'swhat it is for. Could you take a picture of the bracket
before
you put it back on? I've been wanting to get a picture of that part for
years!
Peace,
Pat
- Support Habitat for Humanity, A "hand up", not a "hand out" -
Pat Horne, Network Manager, Shop Supervisor/Future planner, CS Dept,
University of Texas, 1 University Station C0500,Austin, Tx. 78712-1188 USA
voice (512)471-9730, fax (512)471-8885, horne@cs.utexas.edu
On Wed, 10 Dec 2003, Matt Jacquet wrote:
> list,
> I removed my oil pan from my stock 5 main R16 last night and found 2 of the
> follow bracket assemblies with no apparent use (at least at this point).
>
> Sheet metal bracket with:
> .50 radius on 1 end with .380 threw hole
> Joggled to clear oil pan return flange
> Fasten to block with the oil pan bolts (10mm drive) with a spacer for
> clearance.
> Both mount on same side of block below the intake manifold.
>
> Are they retainer clips for the fuel bowl over flow tubes?
> Thats just a guess.
>
> Matt
|