I installed the autometer air/fuel ratio gauge on my car. I used the
autometer 3-wire sensor kit ATM-2244 and the sport comp gauge ATM-3375 I
like this style of gauge better than the bar graph because it breaks the
range up into finer parts.
One thing I did find out is that you have to make ab-so-lute-ly sure that
there are no exhaust system leaks before the gauge. On mine I found out
that the exhaust manifold was leaking where it bolts to the head and the
flex pipe was leaking hugely. The gauge will not give accurate readings
until all the leaks are fixed.
Daniel Neuman
69 2000
Oakland CA
$
$Hey guys,
$
$I want to put an AFR gauge on my car to help with some tuning issues I'm
$having. I was looking through the summit catalog and I came up with the
$following combination of parts. Can someone tell me if this will work, or
$if there is a cheaper alternative. I want to use a 3 wire sensor to be
sure
$I'm getting good readings even when the engine is cold.
$
$PN SUM-G2986 gauge
$PN EDL-3591 oxygen sensor and weld in bung
$
/// datsun-roadsters@autox.team.net mailing list
/// Archives at http://www.team.net/archive
|