Dave,
Any small machine shop should be able to turn the OD of the rotors down for
your swap - I had a local shop do mine for Volvo calipers. The same shop
will tell you you're better off having the faces done by an auot parts
place - they have a specialized lathe for facing rotors that can do both
side evenly.
I found the machine shop by calling several automotive machine shops ( the
ones that do engine work ) till one of them gave me the name of a shop than
does cross-drilling, etc.
Hope that helps.
Mark Sedlack
ZROC
Cuyahoga Falls OH
66 1600 http://home.neo.rr.com/mark2000/images/datsun1600/
77 280Z http://home.neo.rr.com/mark2000/images/datsun1600/Z.htm
----- Original Message -----
From: <davidtotah@yahoo.com>
To: <datsun-roadsters@autox.team.net>
Sent: Thursday, July 10, 2003 11:36 PM
Subject: Rotor Diameter
> Does anyone know where I can take my rotors to not
> only have then turned, but have the diameter machined
> off. I took them to a mom/pop auto parts store today,
> and the owner said he could resurface the rotors, but
> he had no way of making the diameter smaller for the
> caliper conversion that I am attempting.
>
> I live in the San Jose Bay area, and need this project
> done before we move at the end of the month.
>
> Thanks,
> Dave
/// datsun-roadsters@autox.team.net mailing list
/// Archives at http://www.team.net/archive
|