May take more than just a cleaning. The rivets may have worked loose. A
good smack with a hammer and punch will tighten everything back up.
Paul Kort
Ohio
----- Original Message -----
From: <SRL311KA@aol.com>
> The problem is there is resistance between the fuse clips and the fuse
ends.
> Cleaning with vinegar is recommended and then replace the fuses with new
ones.
> Anytime there is heat at a connector it is telling you there is high
> resistance at that point.
>
> Bill Kenyon
/// datsun-roadsters@autox.team.net mailing list
/// Archives at http://www.team.net/archive
|