Check the grounds on the affected lights. It may be that you are not
making contact at the mounting studs. You may have to scrape some of the
paint off the body on the inside where the nuts are. Apply some silicon
grease to the area, or touch up the paint once the lights work.
Peace,
Pat
- Support Habitat for Humanity, A "hand up", not a "hand out" -
Pat Horne, Network Manager, Shop Supervisor/Future planner, CS Dept,
University of Texas, 1 University Station C0500,Austin, Tx. 78712-1188 USA
voice (512)471-9730, fax (512)471-8885, horne@cs.utexas.edu
On Tue, 15 Apr 2003, Matt Jacquet wrote:
> Hey List,
>
> Help! My 68 1600 has returned from the body shop with a great new coat of
> 666 paint and bad case of funky parking light/turn signal disease.
>
> What I have done:
> Removed the front parking light assemblies prior to paint.
> Reinstalled them using the wiring diagram from the manual.
> Rear tail light stayed install.
>
> Symptoms:
> No turn signal front or rear
> No emergency flashers front or rear
> Driver side rear upper and lower glow dim
> Passenger side lower glows dim but upper glows bright
>
> This system work as design before I disassembled the front assemblies.
>
> If you have anything to share please do so!
/// datsun-roadsters@autox.team.net mailing list
/// Archives at http://www.team.net/archive
|