Bill I'll take a couple pictures tomorrow( I have a front part of a
frame I cut off) and send them' due to the frames construction you
should consider corrrosion control,or rust pevention on the inside of
the frame also.
Russ southwell 70 1600
Bill Murdock wrote:
>List,
>
>I'll soon be pulling the body off the frame of my '68 2000. I've
>repaired some rust in the floor pan, rockers, and inner fenders. There's
>more to do once the body is off the frame. Looking ahead, I've been
>puzzling over the final rust-proof coating on the frame and under the
>fenders.
>
>I was thinking of using POR-15 with a topcoat of the POR-15 Chassiscoat
>Black to finish the frame. I'm not sure this is appropriate for the
>exposed sheetmetal of the body for durability and rust resistance,
>especially under the fenders.
>
>Is Waxoyl suitable for watertight sealing of the underneath exposed
>seams of the rear quarter panels/wheel wells?
>
>What primer/topcoat works bets with waxoyl?
>
>Any comments or suggestions?
>
>Thanks in advance.
>
>Bill Murdock
>68 2000
>
>
>
>
>-----Original Message-----
>From: datsunmike [mailto:datsunmike@nyc.rr.com]
>Sent: Tuesday, February 04, 2003 6:29 AM
>To: Andrew Murphy; datsun-roadsters@autox.team.net
>Subject: Re: SRL311-00489 Website Update
>
>Is Ross going to shoot some Waxoyl or other antirust stuff in your
>rockers
>and front inner fenders?
>
>Mike
/// datsun-roadsters@autox.team.net mailing list
/// Archives at http://www.team.net/archive
|