The A cam is 256 degrees duration and .44" valve lift
The B cam is 280 degrees duration and .46" valve lift.
The solex 2 cam as I remember was 296 degrees and .475" valve lift.
The A and B cams are single pattern and the overlap is split evenly. A
has 36 degrees overlap, B has 60. Judging from that, the Solex 2 should
have 76 degrees overlap. I'm sure that someone else can confirm all of
that.
Brian '69 2000
Tampa, FL
web.Tampabay.rr.com/oilleak
-----Original Message-----
I
installed a "255" cam which made a dramatic improvement. I don't know
much
about the 255 cam except that some call it a solex II cam. Does anyone
know
the actual specs on this cam? I would like to know the lift, duration,
overlap, etc... Does anyone know the specs for the B-Cam? The 255 cam
was as
much improvement over the B-Cam as the B-Cam is over the A-Cam
Andy
68 SPL W/U20 Solex II "Tetanus"
/// datsun-roadsters@autox.team.net mailing list
/// Archives at http://www.team.net/archive
|