Be careful as that piston can really fly out. Just hit it with a short
blasts of air.
Mike
----- Original Message -----
From: "Mark Sedlack" <msedlack@neo.rr.com>
To: "Allen" <orangedawg@hotmail.com>; <datsun-roadsters@autox.team.net>
Sent: Sunday, June 09, 2002 9:37 PM
Subject: Re: Brake caliper disassembly
> Got an air compressor? A shot of air from a blow nozzle usually does the
> trick, just be sure to hold the caliper over a pile of rags or some
> corrugated cardboard to catch the piston.
> Mark Sedlack
> OROC
> Cuyahoga Falls OH
> 66 1600 http://home.neo.rr.com/mark2000/images/datsun1600/
> 77 280Z http://home.neo.rr.com/mark2000/images/datsun1600/Z/Z.htm
>
> ----- Original Message -----
> From: "Allen" <orangedawg@hotmail.com>
> To: <datsun-roadsters@autox.team.net>
> Sent: Sunday, June 09, 2002 9:06 PM
> Subject: Brake caliper disassembly
>
>
> > To List,
> >
> > I've got my master cylinder (dual) out and rebuilding it and am
replacing
> the
> > brake lines as well. A question: I've got my calipers apart but how do
I
> get
> > the piston out? I can't use pressure from the master cylinder to force
it
> out
> > since the master cylinder is out of the car. Any suggestions on what to
> do?
> >
> > Allen
> > 1970 2000
> >
> > /// datsun-roadsters@autox.team.net mailing list
> > /// Send admin requests to majordomo@autox.team.net or go to
> > /// http://www.team.net/cgi-bin/majorcool
> > /// Send list postings to datsun-roadsters@autox.team.net
>
> /// datsun-roadsters@autox.team.net mailing list
> /// Send admin requests to majordomo@autox.team.net or go to
> /// http://www.team.net/cgi-bin/majorcool
> /// Send list postings to datsun-roadsters@autox.team.net
/// datsun-roadsters@autox.team.net mailing list
|