Attach the lead to the frame as there are many bolt holes to do so. I also
run additional grounds from the frame to the body, from the engine mount to
the frame and one from the alternator ground to the frame. I use a short
battery cable for the engine ground strap.
Never hurts to use additional ground straps.
Good luck.
Mike
----- Original Message -----
From: "The Belgian Roadster" <chriss@euregio.net>
To: <datsun-roadsters@autox.team.net>
Sent: Tuesday, September 04, 2001 12:31 PM
Subject: ground harness
> Hi friends,
> I'm up with the electrical stuff right now. Mechanicaly everything is
> ready, at least I hope so!
> The big ground wire is screwed below the batterie onto the body, where
> two small wires are leaving to be screwed half a way to the front onto
> the frame. But where has the second one to be screwed to. I suppose it
> is engine ground, but where was it screwed on?
>
> Chris-The Belgian Roadster
> http://albums.photopoint.com/j/AlbumIndex?u=1424148&a=10670695&f=0
|