That's why I said don't go too far. Check the fuel filter. We reattached
the fuel return line so there may have been some crud in there that has
gotten to the filter. The needle valves in on the floats could be sticking
closed. I've had that happen several times. If you're pumping fuel through
the circuit but none is in the float chamber when you take the cover off,
the needle valves are the culprit.
How was it running up until it quit?
Brian
http://web.tampabay.rr.com/oilleak/
It seems like fuel is not getting to the carburetors now.
|