Chris,
I just installed a head gasket that looks just like yours. My problem was
interesting given that
I have copper wire rings imbedded into the top of the block (they encircle
each cylinder bore.
They are about 1/8" from the edge of the bore, and are raised approximately
.032" above the flat
surface of the block). These copper "O" rings did not match the head gasket
perfectly. I lined
everything up the best I could and installed the sucker per Tom's tech tips.
Someone please let
me know if I fouled it up.
Many thanks,
Guy
67.5 SPL
Tmepe, AZ
Christhman@aol.com wrote:
> I have posted a picture of the head gasket i got from West Valley Nissan in
> Phx, AZ. The cylinder holes aren't quite what i would call round. Is this
> normal? Please tell me I got the right part. The part num. it came with on
> the box is 11044-00H00.....Chris
>
> <A HREF="http://groups.yahoo.com/group/datsunroadsters/files/";>here's the
>link to the pics</A>
|