13" wheels will not work on the front of the car
without some modification. You will need to remove
3/32" from the outside edge of the Rotor and then slot
to caliper holes too slide in the caliper to clear the
inside of the wheel. You also will need a wheel with
3" back space to make this work.
Don Miller
69 Turbo V-6 with 13x7 fronts and 13x10 rears
Meridian, ID
--- Dat2000srl@aol.com wrote:
> Hi list. I am wondering if anyone on the list is
> runnig 13" X 7" Libre
> wheeIs. And if so how wide of a tire? just got home
> from a week long
> vaccation in Puerto Rico. I was amased to see alot
> of older Toyotas and
> Datsuns on the road. Every other car was a corolla
> or a 210-B210. But what
> really was exciting was to see many cars equipped
> with the Libre Wheels. I
> must have seen about 50 cars with Libre wheels.
> However they were 13"
> liibres. I did not see any 14", but then again I
> didn't stop any moving carrs
> to check them either. When I told my in-laws that
> thosee weree the wheels I
> have been looking for, they took me to a junker,
> That's what they call it
> theree, and we found a few. All were 13". a couple
> were 6" wide with 4" bolt
> pattern, the other 3 were 7" with 4 1/2" bolt
> pattern. I brought some hamo,
> the 7" widee rims look like they will fit, and
> sinnce they are the correct
> bolt patterrn, I hope to use them.
__________________________________________________
|