Hoon,
The BADROC corral may have a spare (if a '68 will match). I'll check
tonight. All it'll cost is two beers (I'm all out).
>From what I remember, it's not easy to just pull or drop the manifold. I think
you have to unbolt the motor mounts and move the engine enough for the manifold
to clear the frame. A how-to session at CalSpeed's BBQ this weekend? ;>
Fred - So.SF
BADROC
________________________ Reply Separator __________________________
>Subject: cracked exhausted manifold
>Author: Hoon Kim <hoon@pixar.com>
>Date: 8/1/2000 1:26 PM
>
>subject says it all. What to do? Is it serious? How much and how hard
>is it to replace a hairline cracked exhausted manifold. I never
>noticed it before so I don't know if it's been there all along or if
>it is new.
>
>My radiador sprung a leak so all my coolant leaked out, so I'm
>suspecting that it happened then. Since then I have replaced my 2 row
>with a 3 row and seems to be working fine. It's only after I was
>checking the coolant level after installing it that I noticed the
>crack.
>Thanks.
>'67 1600
>--
>
>----------------------------------------------------------
>Hoon Kim
>______\____ hoon@pixar.com
>:/_()_____()_; x6184
>----------------------------------------------------------
|