if on a 66 or earlyer the brake light switch is on the fire wall and reacts
to brake fliud pressure..
it is not ajustable, and if bad needs to be replaced, 20.00 est..cost
Mike Kerr
Restoration Products
3730 todrob Ln.
Placerville, CA 95667
Ph# 530-644-6777
Fax# 530-644-6777
E-mail mikekerr@innercite.com
Web; innercite.com/~wolfgang
-----Original Message-----
From: R Haug <haugchiro@moscow.com>
To: nruff <nruffcorn@prodigy.net>; datsun-roadsters@autox.team.net
<datsun-roadsters@autox.team.net>
Date: Thursday, June 01, 2000 8:17 PM
Subject: Re: Easy Brake Switch Inquiry
>Brake switch is adjustable usually just above the pedal under the dash
there
>should be a switch with wires coming out from it. There should be a jam
nut to
>undo. At least it is like this on my 67.5. Air in brake system has
nothing to
>do with it.
>Bob
>
>nruff wrote:
>
>> Hey all,
>>
>> After swapping the braking components from my 69 to my 67 (minus master)
and
>> getting the battery relocated, I tested my electrical sytems. It takes
>> medium pressure on the pedal to get the brake lights to come on. Is this
>> switch adjustable? I have bled the brakes but still have quite a bit of
air
>> in the system. Could this cause the switch to be less sensative?
>>
>> One thing at a time.....
>>
>> TIA
>>
>> Nathan
|