Below is my letter to Motive Products and their response.
-----Original Message-----
From: Michael Cunningham [mailto:mike@motiveproducts.com]
Sent: Monday, March 13, 2000 9:36 PM
To: Laury, Victor
Subject: Re: power bleeder for Datsun
Victor, thank you for your positive comments about the Motive Products Power
Bleeder. We are working with a design concept for the "universal" Japanese
adaptor that is similar to the one that you describe, although we have yet
to develop a final prototype design. We'd be very happy to receive any
further suggestions that you have on the design of this adaptor. Thanks for
your interest in the Motive Products Power Bleeder.
Michael Cunningham <mike@motiveproducts.com>
www.motiveproducts.com
"Bleed Brakes Like the Pros!"
----- Original Message -----
From: Laury, Victor <LauryV@MTA.NET>
To: <info@motiveproducts.com>
Sent: Thursday, March 09, 2000 9:07 AM
Subject: power bleeder for Datsun
> Motive Products,
>
> Your device looks like a winner and I like the price as well. It's caused
a stir on our Datsun Roadster list and we are waiting to hear that you have
developed an adapter for our cars. The same adapter will also work for the
510 and Zcar communities that we interact with. I have an idea of what would
work. An adjustable strap attached to the cap that would wrap around the
bottom of the brake/clutch master cylinder to a fold-over locking lever on
the other side of the cap. Drawings in AutoCAD format can be made on your
request.
Victor A. Laury
|