33 mm works out. At 25.4 mm/in, 33 mm = 1.30 in, right between 1.25 and 1.312.
(Couldn't resist checking that out, engineers love to crank numbers...)
Gary McCormick
San Jose, CA
------------------------------------------------------------------------------------------
Tom Phelan wrote:
> >I am having trouble removing the lower spindle from my suspension. First,
> >what is the size of the bushing. 1 1/4 is too small and 1 5/16 seems
> >sloppy. Are these usually put on with an impact wrench or am I dealing
> >with a very strong PO?
>
> Try metrics. Upper spindle is a 28mm and lower is (I believe) 33mm. They are
> very tight. I used a heavy wrench and a 4 ft piece of pipe to extend the
> handle for leverage. Good luck.
>
> TomP
> 68 2L #2771
> Hendersonville NC
|